Quick Voltage Drop Calculator

Voltage Drop Calculator

This voltage drop calculator is for Pyrotenax Copper-Sheathed MI Wiring cable.

* Required Field

*

*   amperes

*   awg

*

*   %

*   feet

    feet

Notes:
  • Ensure all the applicable requirements of the National and Local Electrical Codesare met.
  • If the voltage drop is over the desired limit, select a larger cable and repeat. Alternatively, use parallel runs of smaller cable, calculating voltage drop on the reduced current carried by each.
  • For fire pump motors, check that the voltage drop does not exceed 5% @ 115% rated current; and does not equal or exceed 15% at locked rotor current, including the drop in the motor/generator.
  • These calculated voltage drops represent line to line voltage drop in a 3-phase system. To estimate the single phase voltage drop, simply multiply the 3 phase line to line voltage drop by 1.16.
  • In the rare instances where line to neutral voltage drop in a three phase system is required, multiply the 3 phase line to line voltage drop by 0.58.
Global Headquarters

7433 Harwin Drive
Houston, TX 77036 USA
Tel: (800) 545-6258 (within U.S. only)
Tel: (650) 216-1526 (outside U.S.)
Fax: (800) 527-5703
Fax: (650) 474-7711
info@Pentairthermal.com

Other Locations

Europe, Middle east, Africa(EMEA) Headquarters
Romeinse Straat 14
3001 Leuven
Belgium/Belgique
Tel: (32) 16 213 511
Fax: (32) 16 213 603

Inspired Solutions for a Changing World